Cricut Maker Block of the Week – Week 1: Nine Patch Quilt Block

As promised, here is the first quilt block for our Cricut Maker Block of the Week, the Nine Patch Quilt Block! Each week I’ll share with you how to make another part of this quilt, until we have the whole quilt finished. The fabric is all cut and marked on the Cricut Maker machine. If you want the details, check out my Introduction to the Cricut Maker Block of the Week. If you want to join in and don’t know where to start, check out the Cricut Maker Block of the Week Reference Page. It will get you current, and give you all the information you need.

Cricut Maker Block of the Week - Block 1: Nine Patch

This post contains affiliate links. Clicking these links gives me a small commission at no cost to you.

Before you start here, you need to have followed along on the introduction, borders, and sashing instructions. Make sure you’ve done that before you continue.

You can watch the video here, or follow along the steps below.

Cut the fabric for the Nine Patch Quilt Block

Open up the Cricut Maker Block of the Week Block 1: Nine Patch in Cricut Design Space. You need to do this on a desktop or laptop computer with Design Space installed. From there, you can save the file, and open it up in Design Space on whatever device you like best.

Nine Patch Quilt Block in Design Space

We are using the fabrics you chose to be your “pink” and your “white” when you labeled your fabrics. Place them on the mats, right side down. Make sure to rub down the sides of the mat, as that is where the rollers can catch the fabric, and lift it up.

Press “Make It” in Cricut Design Space. You will see the two mats with the blue lines.

mats for nine patch

Press “Continue.”

select material

Select Material as “Cotton.”

load machine

Install the Cricut Fabric Pen. I like to put the cap on the back of the pen so I don’t lose it. Install the rotary cutter. Place the mat up to the rollers, and press the flashing arrows key. The mat will load into the machine.

Cut both mats. Peel away the extra fabric, and you’ll have something that looks like this.

cut on mats

Use your tweezers to remove the squares, and lay them out to create the block design. It will look like a checkerboard.

lay out the block

Sew together the Rows of your Nine Patch

Take the first two pieces in the top row – the teal and the red as shown in this image (the white and pink as labeled on the fabrics). Put them right-sides-together, with all the edges lining up. Stitch them together using a 1/4″ seam allowance. You can stitch right on that blue line, going all the way across from edge to edge.

sew rows

Congratulations! You’ve sewn your first seam! This quilt is officially underway!!

**pause for a happy dance**

first seam

Lift up that teal fabric, exposing the red. Put the other teal on top of the red, and stitch down. You now have a teal piece on each side of the red stripe. YES!

Repeat with the other two rows, making sure to keep the checkerboard design.

Press the seams to the side. Have all the seams go towards the “dark” fabric, whichever one that is for you.

press seams

Finish the Nine Patch Quilt Block

Here you can see the back of the block, with all the seams pressed. If you watched the video, you’ll notice that the seams are in the exact opposite directions from in the video. That’s because in the video the pink was my dark, and here the teal was my “dark”. If you’re not sure which of your fabrics is darker, just choose one. It won’t matter too terribly. I pinky promise.

What IS important is that if your seams go out in one row, that in the rows above or below it, they are going in. And vice versa. This allows your seams to nestle into each other, which helps your points match.

press the rows

Place your top row on top of your bottom row, right sides together. Stitch down one side… making sure it is the correct side (the side they are supposed to meet up on).

layer two rows

Then repeat, stitching the bottom row onto the other side.

last seam

stitch last row

Press these seams (I like pressing out, but it won’t make too much of a difference), and your block is complete!

finished nine patch quilt block

YAY!!

Make sure to come back next week. Each week I’ll be sharing another step in making this quilt. Next week we’ll make an uneven nine patch, using three colors! So fun to see what a difference a slight variation makes!

 

Save

Cricut Maker Block of the Week – Week 1: Introduction, Supplies, Border, Sashing

I’m so excited to share with you this project that I have been working on for weeks and weeks! As I mentioned in my last post, Cricut gave me one of their new Cricut Maker machines to play with. It has a special rotary blade attachment designed for cutting fabric! As a thank-you, and to pay it forward, I designed a FREE mini quilt pattern that is cut entirely on the Cricut Maker, and I’ll be sharing it step-by-step each week so you can make it yourself! I have recorded videos if you learn best by watching, and I’ll have step-by-step instructions here, if you like to read the instructions at your own pace.

Cricut Maker Block of the Week - Week 1 - Introduction, supplies, borders and sashing

This post includes affiliate links. These links pay a small commission back to me, at no extra cost to you.

Here are the basic supplies you’ll need to make the Cricut Maker Quilt:

If you want detailed supply information, check out the expanded supply list.

The Cricut Maker Machine: on the Cricut site or on Amazon
Fabric bundle (either the Cricut bundle or 5 pieces of fabric, each 1/3 yard): on the Cricut site  or on Amazon
Cricut Fabric mat, you’ll need a 12×24″ mat, and a 12×12″ mat: on the Cricut site
Cricut Fabric pen: on the Cricut site or on Amazon
Printable Vinyl: on the Cricut site
Sewing Machine
Thread

Iron & Ironing Board
Device with Cricut Design Space installed
Tweezers (optional)

If you’d like to watch the video, you can watch it here:

 

Preparing the fabrics:

The quilt is made using blocks that are combined with sashing, and has a border around the outside. In the videos, I’m using the Garden Girl Fabric. Here on the site, I’m showing the quilt made with the Rockstar collection.

If you’re using the fabric I’m showing, you can just follow along and use the same fabrics. But if you’re using a different set of fabric, or your own fabric, you’ll want to label each fabric so that you know which is which. I created a set of colored stickers that coordinates with the colors on the pieces in Cricut Design Space. So, if you see yellow and white pieces, you know to use the fabrics you’ve labeled as yellow and white. Use the print then cut label file, and print it onto Cricut Printable Vinyl.

Add labels

Here are the stickers on the fabric, identifying which fabric belongs with which color in Design Space.

fabric labels

Remove the protective cover from your 12×24″ mat. While working in the mat, try not to touch the adhesive. The oils in your fingers can reduce the tacky-ness of the mat.

Place the border fabric (marked with a purple sticker) right side DOWN on the mat. The raw edge of the fabric should be across the top of the mat. Make sure to press down the fabric securely, especially along the sides. This is where the rollers feed the mat into the machine, and could potentially move the fabric. Having these sides pressed down securely is key. Set aside until you are ready to load the mat into the machine

Cutting the Borders

Open up the Cricut Maker BOTW Border file in Design Space.

quilt border file in Cricut Design Space

It will tell you that you need the larger, 12×24″ mat. Click OK. You’ll see two longer pieces and two shorter pieces. The light blue lines show the seam allowance that will be marked with the blue fabric pen.

send to maker

Press “continue” in the bottom right hand corner. Then it takes you to a screen where you set the material. The fabric we are using is “Cotton”. Press on “Fabric – Cotton” on the bottom right.

select material

The next screen will prompt you to install your fabric pen and rotary blade before loading the mat. The fabric pen is inserted by opening the lever on side A, uncapping the pen, inserting it into the housing, then closing the housing. I like to put the cap on the back of the pen so that I can find it easily later.

If your rotary blade is not already installed, open side B. Remove the existing blade, and install the rotary blade. Close the lever.

Hold the mat up to the rollers, guiding the sides between the two white tabs on the sides, then press the arrow key. The machine will load the mat. Press the blinking Cricut “C”, and the machine will do its magic! First, it will mark the borders with the pen. Then it will cut with the rotary blade. When you’re done, it will prompt you to unload the mat using the arrow button. Make sure to remove the pen, and replace the cap. This will keep it from drying out.

Take the mat to your table, and remove the extra fabric by lifting from one corner, and pulling up. You can trim off the small strings, then set the rest aside. We will be using this for one of the blocks, and the binding. Use tweezers to gently lift off the border pieces. Go slow, and pull up any fraying threads to keep fraying to a minimum.

If you have threads left on the mat, you can use tweezers to pick them up. A piece of strong grip transfer tape works well, too. Don’t use a scraper tool, don’t use your fingers… and don’t worry if there are a few stray threads left. It will not hurt to use a mat with a few threads left on.

Cutting the Sashing

Repeat these steps, this time for the Sashing Fabric (the aqua/teal color sticker), using the Sashing File in Cricut Design Space.

send sashing to maker

When you are done cutting, make sure to remove the pen and put the cap back on, so it doesn’t dry out.

Gently remove these strips, and set aside with the border strips.

cut pieces

 

Originally, this was all I had planned for today. But I knew that some people would be sad they didn’t get to do any sewing! So, later today I’ll be sharing the first block both here and on YouTube!

 

Save

Learn to Quilt with your Cricut – Cricut Maker Block of the Week

I’m so excited to share with you my new project … which could become your new project! The Cricut Maker Block of the Week! Over the course of several weeks, I am going to teach basic quilting techniques using the Cricut Maker.

Last month, I was invited to Salt Lake City to participate in the launch of the new Cricut Maker. This machine is extra exciting because it has a rotary blade attachment. The machine can rotate this blade 360 degrees to cut directionally. Which makes it perfect for cutting non-bonded fabrics (fabrics that don’t have an interfacing or interlining fused to the back). When I saw this, I was super excited. As a quilter who has taught all kinds of quilting classes, and is excited about teaching beginners how to quilt, I saw an opportunity to teach new quilters how to sew their first quilt! And teaching new quilters is a serious passion of mine.

Learn to Quilt with your Cricut Machine

Here are the details for the Cricut Maker Block of the Week:

Lessons begin Friday, September 22nd. It will take us 14 weeks to finish this quilt (so you can have it done in time for Christmas!). It finishes at 23″ x 23″ square, so it makes a great baby quilt or wall hanging. We will go through all the steps – cutting and piecing the blocks, adding the sashing and borders, quilting your quilt on your home machine, and even binding the quilt! It sounds like a big commitment, but most weeks you’ll be done in less than 90 minutes.

Every Friday I will share the lesson both here and on YouTube. You can watch the video, read the step-by-step instructions with photos, or do both. You can leave questions and comments both here and on YouTube if you need help.

The lessons won’t go away – if you start a week later, a month later, or 6 months later… everything will still be there. If you get busy (hey, life happens), everything will still be there for you to pick up when life settles down. As my uncle says, “No hurries, no worries.”

The cost is FREE. I’m not charging you anything to learn how to make this quilt. Cricut gave me the Maker machine, and this is my way of paying it forward. I will get a few pennies from ads on the YouTube Videos, and ads here on this site. And if you choose to purchase materials through my affiliate links, I’ll get a small commission which helps compensate for my time and materials. But I won’t ever ask you to send me any money. There won’t be a sales pitch at the end of the 14 weeks for a pricy course (although, hey… there is a thought… nope. nevermind. not interested).

If you’d like to join in, you’ll want to gather your supplies. Here is what you’ll need. BTW, I’ve put affiliate links here – if you purchase through these links, awesome! If you don’t, I’ll never know. Either way, we’re good.

Here is what you’ll need to make the Cricut Maker Block of the Week Quilt:

Cricut Maker Machine. Yes, it has to be the Maker. It is the one with the rotary blade, and that is really a must here. That first link will take you to the Cricut Site to buy the machine. If you pay for Cricut Access, you’ll get 10% off buying the machine there. If you’re an Amazon junkie, you can buy the Cricut Maker on Amazon. If you hate waiting, the Cricut Maker is being sold at JoAnns and Michaels as well. Just call ahead to make sure they have one in stock.

Fabric. I’ve designed the project to be made using a single bundle of Cricut Designer Fabric, plus 7/8 yards of backing fabric. I’ve used the Rock Star bundle for the first quilt (pictured above), and the Garden Girl sampler for the quilt I’m making on the video. But, I’ve designed this so that any of the available bundles will work. Or, you could create your own bundle. You’ll need 5 cuts of fabric, each 1/3 yard. Pick a fun print for the border, and 4 smaller prints or solids for the blocks and sashing. Make sure you get your 7/8 yards of backing fabric. Amazon lovers, you can also buy the Cricut Fabric on Amazon.

12 x 24″ Fabric Mat. The machine comes with a 12 x 12 mat, but to cut the borders and sashing, you’ll need a 12 x 24″ mat.

Cricut Fabric Pen. We will be using this to mark seam allowances. If you’re an experienced quilter, you can skip this. If you want to pay way more, you can buy the fabric Pen on Amazon. My Michael’s and JoAnns carry these pens as well, for the normal price.

Printable Stickers. I used Cricut Printable Vinyl because they are durable, but Printable Sticker Paper will work as well. We’re going to use 1 sheet to print-then-cut labels for the fabric. If you don’t have access to a printer, you could use regular labels and write the colors on them, or use marker to mark the colors (pink, yellow, white, purple, aqua). This will help you know which fabric to use when, especially if you’re using a different fabric bundle than I am.

Thread. I’m not terribly picky about thread. I have friends that are passionate about certain brands of thread. If you’re at a quilt shop and they have spools of Aurifil 50wt, that is great. If you’re at the store and see Coats & Clark, that is also awesome. You want a quilting-weight thread. If you’re not sure, ask a sales associate at the store, and they’ll help you find an appropriate thread. Find a color that blends in with your fabrics – white, cream, or light grey are often great choices. Some people are going to tell you that it has to be 100% cotton thread. I’m not going to. Go with what makes you happy, here.

Sewing Machine. The Cricut will cut the fabric, but we need a sewing machine to put the pieces back together. Use what you have here. I have a big, fancy machine… but I’m not using it for this quilt. I pulled out my nearly 20-year-old fully-mechanical Viking machine to sew this project on. I did this to show you that while fancy machines are fun… you don’t need to break the bank to sew something pretty.

Iron. Whatever you use to get wrinkles out of shirts when you have a job interview or parent-teacher conference will work great. If you don’t have an iron, find an inexpensive one at Walmart or Target. If you that hate ironing – don’t worry, this isn’t “real” ironing. This is quilt ironing, which is WAY more fun!

Ironing board/Ironing pad. You don’t want to melt your tabletop, so an ironing board or ironing pad is a great idea. In a pinch, you could use a folded bath towel, with a smoother tea towel over the top. It can be our little secret.

That will get you through the first 11 weeks! If you want to buy all your supplies now, read on. If you want to hold off on buying any more, then save the rest of this list until later.

 

After week 11, you’ll  also need:

Batting – a 25″ x 25″ piece of batting is plenty. You can purchase a crib sized quilt batting. I suggest a LOW LOFT batting. Either 100% cotton or 80-20 blend. I’ve been using Fairfield batting for years, and keep a giant roll in the sewing room. No need for you to invest in that yet! If you want cotton, try their organic cotton batting. If you want a blend, try their 40/60 blend batting. If you want something really fun, try their evergreen batting. It is made from recycled bottles which gives it that green color – but the green won’t show up on your quilts. It is really lovely for free motion quilting, and I wish I could buy a big roll of it!

Safety Pins or basting spray. We’ll talk about this more in week 13, and which is best for which type of quilting you want to do. If you have safety pins on hand, those will work. If you’re buying new ones, check out the curved safety pins. If you are going to try free-motion quilting, I recommend basting spray. I like Thermoweb Spray N Bond.

Walking foot or Free Motion Foot – this will depend on how you want to quilt your quilt. If you are new to quilting, a walking foot is usually the best choice. There is no one-size-fits-all for sewing machine feet. Check with whatever store distributes your brand of sewing machine to find a foot that fits your make and model. A walking foot can run you from $20-100, depending on how fancy your machine is. If you’re an adventurous beginner, or have some more experience, you might want to try free-motion quilting. Get a free motion foot for your machine. An Embroidery foot might work as well. I will be teaching both the walking foot and free motion quilting techniques in week 13.

Ruler, Rotary cutter, and mat (for squaring up). If you have a friend who is a quilter, ask them if you can square up your quilt at their house. If there is a quilt shop local to you that offers their classroom for open use, consider that. But if you find that you love quilting, this is worth the investment! Here are the supplies I love:

Omnigrid 6×24″ Ruler
Fiskars Rotary Cutter, I like 45mm size, but you can go with whatever you have. Omnigrid and Olfa make good rotary cutters as well.
Omnigrid Mat

Hand sewing needle

Thimble (optional) – my favorite is the Dritz Comfort Grip Thimble.

 

By now you’re probably thinking: WOW! That is a TON of stuff!

Well, you’re right. The first quilt you make is nearly always going to be the most expensive, as you purchase supplies that you’ll be using over and over again. If you treat them right, these supplies will last a decade or more. In my over 20 years of quilting, I’ve only had two 6×24″ rulers. The first one lasted me 15 years – and my mom had used it for many years before she handed it down to me.

If you’re not sure – before you make the investment, ask around. Someone surely has some quilting supplies in their closet they’d be willing to loan you. And maybe you can get them excited about quilting again, and make quilts together!

That’s everything you need to know to get started! Make sure you bookmark this post so that you can keep the supply list handy. Or start yourself a “quilts I’m going to make” Pinterest board (if you haven’t already). This can be your first pin!

I’m super excited to start on this quilting journey together! Please reach out if you have any questions!

 

Save

Save

Save

Save