Fabric Fest and a Rolie Polie Giveaway!

I’m so excited to share more of my Jelly Roll Race Quilts here today! Those of you who follow my blog know that I made a Jelly Roll Race Quilt in less than 24 hours from start to finish earlier this year, I called it my “#Instaquilt” because I Instagrammed the process of cutting fabric, stitching, getting it to the quilter, and binding it. Since then, I’ve been busy coming up with fresh ways to revise this new classic so that I can share them all with you at Riley Blake Fabric Fest here in Las Vegas.

three jelly roll race quilts

I first learned about this quilt when I was working at Quiltique, an awesome quilt shop in Henderson, just outside of Las Vegas. One of our customers shared it with me, and it was love at first stitch. I have 2 nieces and 3 nephews all born in the last 3 years (3 of them in the last 12 months), so having a fast “go to” quilt pattern is a must!

I’m going to be teaching the Jelly Roll Race Quilt at Riley Blake Fabric Fest this fall. BUT – not just the plain jelly roll race quilt. I’ve deconstructed, re-constructed, and updated the jelly roll race quilt. These variations add 10-30 minutes to the time it takes to make a regular jelly roll race quilt – and give you so much more variety! If you’ve never made a Jelly Roll Race quilt before, I’ll show you the basics. Then we’ll take it up a notch with fun ways to make the quilt your own. Let me take you through some of these new quilts I’ve stitched up…

Christmas Jelly Roll Race Quilt

This first is a Standard Jelly Roll Race quilt. If you’ve seen or done one, you can tell by the mitered seams, and the random placement of the fabric. I used 42 strips from Riley Blake’s new Christmas Fabric “A Merry Little Christmas“. Don’t you love how cheery it looks? This quilt is the perfect Christmas gift! I love giving quilts as Christmas presents, and these quilts are the best for making as gifts. They don’t take weeks to make, they look cute in any fabric, and there is very little waste. After piecing your quilt top, the only waste you have is one piece 2.5″x18”, and the little bit you trim off to square your quilt top.

 

This second one is so much fun! I used Riley Blake’s “Pirate Mateys” and added squares between half-strips of fabric. There are some secrets to putting this top together, but it is a lot easier than it looks, and the result is darling! I’d love to do more of these with bright colored squares that really pop against the fabric.

Pirate Jelly Roll Race Quilt

I’ve been enjoying this quilt a lot, it sits on my livingroom floor and my kids play on it all the time. My friend Nichol of A Desert Quilter quilted all of these for me, and she quilted some darling pirate motifs into this quilt top!

Appliqued Jelly Roll Race Quilt

This last one, made out of Riley Blake “Cruiser Blvd”  has me completely tickled. A Jelly Roll Race Quilt is like a deck of cards. You shuffle up the strips, stitch them together, and there is no telling where they will show up. For this quilt, I “stacked the deck.” I’ve mapped out the final locations of the strips, and I put them in the order I wanted them to give me a beautiful “solid” space to applique in. This technique is so much fun for anyone who likes to applique, who wants to super-customize a quilt, for machine embroiderers who like to have large areas to embroider on, or machine quilters who like to have space in which to stitch up quilts and really have their quilting stand out… really, just about anyone will love the options that stacking the deck gives you! Here is the whole quilt all laid out:

Applique Jelly Roll Race Quilt

My son is 4 and a half, and he loves this quilt. It is “his” quilt and he loves reading his name on it. Once you’ve deconstructed the placement of the strips in a Jelly Roll Race quilt, there are so many new possibilities that open up to you!

I still have at least one more idea up my sleeve … but I’ll wait to share that one at Fabric Fest. You’ll have to come to my class so that I can share it with you!

Giveaway!

The base to make these quick quilts are Rolie Polies from Riley Blake. So, I’m giving away TWO Rolie Polies to one lucky winner! Just leave a comment at the end of this post letting me know which of these fast quilts you’d most like to learn more about! Make sure to include your contact information so that I can get in touch with you if you win.

This post is part of an awesome blog hop with the rest of the teachers who will be sharing all their amazing talents at Riley Blake Fabric Fest. Check out the rest of these great teachers!

During the blog hop, these great sites will be blogging all about Fabric Fest and the wonderful classes they are teaching. They will also be giving away some great prizes, so you’ll want to keep this list close by!
Trust us.
You CAN’T miss a single day! 
Wednesday, June 5
Jina Barney of Riley Blake Designs
Thursday, June 6 Lori Holt of Bee in My Bonnet
 Friday, June 7
Elizabeth and Liz Evans of Simply Simon & Co
Saturday, June 8
Nancy Zieman/Deanna Springer of Nancy Zieman.com
Monday, June 10
Melissa Mortenson of The Polka Dot Chair 
Tuesday, June 11
Carolina Moore of Always Expect Moore
Wednesday, June 12
Paige Hill of Riley Blake Designs, Jennifer of Tatertots and Jello,
Becky & Kari of U-Create
Thursday, June 13
Amanda Herring of The Quilted Fish
Friday, June 14
Kim Christopherson & Kris Thurgood of My Girlfriends Quilt Shoppe
Saturday, June 15
Bonnie Bailey on Riley Blake Designs
 Monday, June 17
Lila Tueller of Lila Tueller Designs
Tuesday, June 18
Amy Smart of Diary of a Quilter
Wednesday, June 19
Lindsay Wilkes of The Cottage Mama
Thursday, June 20
Sue Daley of Sue Daley Designs
Friday, June 21
Eleanor Burns/ Sue Bouchard of Quilt in a Day
Saturday, June 22
Jenny, Natalie, & Sarah of Missouri Star Quilt Company
 Monday, June 24
Andrea Goddard of And I Sew
Tuesday, June 25
Becky, Brooke, Jamie, Kirsten, & Nikkala of The Crafting Chicks
Wednesday, June 26
Deonn Stott of Quiltscapes 
 Thursday, June 27
Sandy Workman of Pine Mountain Designs
Friday, June 28
Sydney Haglund of Memory Quilt Maker

Precut Hexagon Honeycombs: Happy Go Lucky Quilted Table Topper

I’m still getting my monthly pack of Charming Solids from Pink Chalk Fabrics. It is like getting unfattening chocolate in my mailbox each month, and even when I don’t have time to make anything with the fabric I’m sent, I love it. I’ve thought about cancelling… but I just can’t. Not yet. And I’m so glad I didn’t because last week I got an awesome surprise in my mailbox! Usually, the Charming Solids club pack has 2 charm packs and coordinating solids. This month they sent me one of the new precut hexagons along with coordinates! That was all it took to get my quilting mojo going, and I whipped up this little hexagon table topper. The best part? NO Y-seams!

A Y-seam is unlike a traditional seam. A Y-seam is when 3 seams come together in one spot, often forming a Y shape. It can be hard to get a perfect Y-seam with no pucker. And a quilt full of Y-seams can be a challenge. By cutting triangles out of my solid coordinating fabrics and creating diamond units, I eliminated the need for Y-seams. And I also have ideas for more fun no-y-seam-hexagon projects!

To make this hexagon table topper, you need:
– Bonnie & Camille Happy Go Lucky Honeycomb Hexies
– 8 Coordinating Solids. I had an “extra-wide” fat eighth of each. A regular fat eighth will be fine.
– Coordinating fabrics for scrappy binding. I used fabrics I had on hand, plus some of my coordinates from the pack. If you start with fat quarters of your coordinating solids, you will have plenty for a scrappy binding.
– 1 1/4 yards backing fabric
– batting of your choice

Cut 72 triangle units from the coordinating solids. I created a template for mine. Each side is 3 3/8″, and the whole unit is 3″ from base to point. I cut 3″ strips from my fabric, and then cut the triangle units from the strip. If you cut your strips from the length of your fat eighth, rather than the width, you’ll have more usable fabric to use in your binding.

Set aside 5 hexagons. Stitch the triangle units to each side of your remaining hexagons to create diamonds. Of the 5 hexagons you pulled aside, select 2, and stitch a triangle to only one side of each. These two will go on either side of the middle row. You will have leftover triangles that you’ll use later.

Set aside 3 diamonds. Stitch your remaining diamonds into pairs, being careful to line up your seams.

Use your pairs, the diamonds you set aside, the single-triangle units, and your leftover triangles to create rows:
2 rows of 4, with an extra triangle
2 rows of 5, with an extra triangle
2 rows of 6, with an extra triangle
1 row of 7, using the single-triangle units on each end

Stitch your rows together to make your quilt top, being careful to line up your seams.

Quilt as desired, and bind. I used a 2″ scrappy binding.

Makes a great baby play quilt or table topper.

Urban Sprawl Quilt with Art Gallery Fabrics

EEK!! Today I’m over at the Art Gallery Fabrics Blog sharing my Stackable, Squishable Fabric Blocks tutorial (if you ever want to make fabric blocks, these ones are the best, y’all – they are both squishable and stackable which is kinda a miracle in fabric construction).

AND – I’m giving away a Fat Quarter Bundle of the fabrics I used for those blocks – get the details at the bottom of this post!!

I’m super excited to be sharing on the AGF blog, but also wanted to share something fun for y’all here, so I’m sharing my Urban Sprawl quilt that I made with the yummy Urban Mod Fat Quarters that AGF sent me.

Yup – here is what they sent… the full line of Urban Mod. I just knew I wanted to make a quilt top out of these… a quilt top that would truly do these modern fabrics justice. So I came up with Urban Sprawl. It has a modern look, and some modern cutting techniques, but is really quick and easy to put together (I promise)!

I started by pressing all of my fat quarters, stacking them up, and then cutting them:

a: 2″ x 20ish (length of the FQ)
b: 11.5″ x 11.5″
c: 11.5″ x 2″
d: 11.5″ x 2″
e: extra fabic – use for scrappy binding/backing if desired

Fabric B is for my blocks, A and C is for my modern sashing, and D is really extra (some of the FQs aren’t quite big enough to get a D out of them), I wanted it for my backing, which you’ll see at the end.

I then cut my block (B) pieces into 3.

I stacked 5 fabrics, then cut at an angle across. You can cut at whatever angle you like, but cut at least 1.5″ away from the corners, just to reduce bulk at the corners in your finished block. Move the smaller piece to the side, then cut the larger piece into 2, again at an angle and at least 1.5″ away from the corner.

Here is another set that I cut:

Keep your sets together!

Take your fabric to your sewing machine. Lay out one set. Of the 3 pieces for the block, pick one section. Move the top fabric to the bottom. Then for the second section, move the top 2 fabrics to the bottom.

You should now have 3 sections, each with a different fabric on top.

Stitch the two smaller pieces together. Press the seam open. Then stitch the larger piece on the side. Press open.

Repeat with all blocks.

Square up blocks to 10.5″.

Here comes the fun part: adding the sashing!

Add one of the small sashing pieces (C) to each block. One piece, and it doesn’t matter what side of the block you add it to. Just sew, sew, sew! The sashing piece will be longer than the block. That’s ok.

Press the seam, and then trim the sashing piece flush with the block.

Sew your blocks into rows of 4. All the sashings should be parallel, but you can have fun with the placement. The rows should not be block – sashing – block – sashing – block – sashing – block – sashing. Instead, try block – sashing – block – sashing – sashing – block – block – sashing. Go for variety in each row.

Stitch your A pieces into long strips of 3, by sewing 3 pieces end-to-end. This will be your horizontal sashing.

Add a horizontal sashing piece to the top or bottom of each row. Press, and trim the sashing piece to the size of the row.

Stitch your sashed rows together to form the quilt top. Again, you don’t have to have a perfect alternation of sashing and blocks. Have fun with the placement!

Once you’re done with the top, it is time to work on the backing. I used the D strips, plus some more 2″ strips I cut from E to make a stacked coin column to piece into my backing. This quilt is just barely wider than traditional quilting cotton, so it was the perfect way to stretch the use of my fabric, and add a fun element to the quilt back as well.

Now all that is left is to quilt it! I’m thinking of doing an echo of the pieces in the blocks… what do you think? How would you quilt it?

Be sure to check out my Stackable Squishable Fabric Blocks on the AGF Blog – and if you love quilts, you can check out some of the other quilts I’ve done!

Want to win an awesome bundle of AGF? To be eligible to win you must do three things:
1. Follow AGF on your favorite social media platformeither PinterestFacebook, Twitter and Subscribe to the AGF blog to stay up to date on all things AGF & the Fat Quarter Gang!
2. Follow me on Pinterest, Facebook, or Twitter
3. Leave me a comment below (maybe tell me how you’d quilt Urban Sprawl?)! Make sure to give me your e-mail address…

I’ll be picking a winner on June 3rd!

Hanging Canvas Quilted Tapestry Wallhanging

I’m not sure what to call this. I started with a UPrinting Rolled Canvas. I added some fabric, quilting, upholstery fabric, binding… and hung it on the wall. Though I’m not sure if it is a quilt, a tapestry, or a wall hanging, I do know that I LOVE it, and it was super simple to make!

Supplies:
UPrinting Rolled Canvas
Scrap Fabric
Upholstery Fabric
Spray Adhesive for Fabric (like 505 spray)

I ordered my rolled canvas from UPrinting. Super easy. All I had to do was upload my picture (I just LOVE this picture of my boys), select my size, and enter my information to have it delivered to me in just a few days. I ordered the canvas untrimmed, but they will trim it at no extra charge.

Since I ordered my canvas untrimmed, I had to trim it down. I trimmed it with a scant quarter inch of white, which will disappear into my seam allowance. I could also trim it to the size of the photo, and my finished piece would be about a half inch smaller.

I cut my fabric scraps into 2.5″ strips. I stitched one to the top and one to the bottom, and then finger-pressed open. I was worried about using a hot iron on the canvas.

I stitched rows on the sides as well. To get a scrappy look, I cut up the rest of my fabric, and stitched the pieces into one long strip. I used this scrappy strip to add a second border. This one I pressed open with an iron, careful to avoid the printed picture.

I had some upholstery fabric left over from when we staged our house to sell. Six years ago. I swear I’m not a hoarder, despite much evidence to the contrary! I just plan really far ahead. For projects I haven’t even come up with yet. Like this one. Where the fabric was ideal. It matched my color scheme perfectly. I attached it to the back with spray adhesive designed for fabric – 505 spray. I considered adding some kind of batting – either regular batting or a fusible fleece – which would add a puffy, quilted look. In the end, I decided I wanted it to be more smooth and flat, and look less quilty.

I did a stitch-in-the-ditch to secure the layers together, and give it a more hand-made look. After sewing, I trimmed the backing to the size of the front.

To make it easy to hang, I added corner pockets to the back of the wall hanging. These are super simple, just squares of fabric folded into triangles and stitched into the corners when the binding is sewn on. Easier than adding a hanging sleeve, and for a small wall hanging, so simple. I just cut a dowel down to size and tucked it in the corner pockets to hang the piece when finished.

I bound the whole thing with a dark brown binding, and hung it on the wall.

When Little Moore woke up from his nap he said “I LOVE it!” And Hubby noticed it immediately when he got home from work, and actually commented that he liked it as well. I’d say this project is a hit all the way around!

Always,

Disclosure: this is a sponsored post. Though I received compensation for this post, all opinions are mine.