R2D2 Quilt

My kids are crazy for Star Wars, and their favorite droid is R2D2. Which is why I made them this fun R2D2 quilt to hang on their wall. It is very simple to make – no curved piecing, no fancy quilting – just straight stitching and quilting using a walking foot.

Star Wars R2D2 Mini Quilt - easy to make in an afternoon!

To make this mini quilt you’ll need:

Fat Quarter Grey Fabric
Fat Quarter White Fabric
1/2 yard backing fabric
Thermoweb DecoFoil Hot Melt Adhesive
Thermoweb Decofoil in Blue, Red, Black, and Pewter
Fairfield Cotton Batting
Thermoweb Basting Spray
Iron and Ironing Board
Sewing Machine with Walking foot and grey thread
Rotary Cutter and Ruler
Needle to Bury Threads

Cut your fabric. You’ll need a 12×12″ piece of the white fabric and a 12×10″ piece of the grey fabric. Put the rest of the fabric aside for the backing and binding.

Sew the two pieces of fabric together along the 12″ side.

Press seam towards the dark side (see what I did there? The “Dark Side”? hahaha!)

Measure 6″ in on the seam, and 1.5″ up. Mark this point. Use this as the center to mark a half-circle along the top. supplies for R2D2 mini quilt

Cut the Hotmelt adhesive. You’ll need:
2 – 1″x2″
2 – 3/4″x2″
2 – 1″x1″
1 – 1″x6″
2 – 1″x4.5″
1 – 2″x4″ with 1.5″ boxes cut out of the middle
1 – 2″x3″
1 – 3″x4″ cut into a trapezoid
1 – 2″ circle

Place the HotMelt pieces onto the fabric according to the photo. Fuse in place. Allow to cool, then remove the paper backing.

If you’d like your R2D2 Quilt fully quilted, base the mini, and quilt around all the hotmelt adhesive now, before adding the foil. This will ensure that the foil isn’t scratched by the walking foot later. I skipped this step, because a wall hanging doesn’t need a lot of quilting.

Cut a 2″ circle from the black Decofoil and a 1″ circle from the red DecoFoil. Place on top of the HotMelt. DO NOT FUSE YET. This is my layered foil technique.

Cut a square large enough to cover the 2″ circle out of the Pewter, and put in place. Cut the blue DecoFoil to cover all the other pieces.

cover with foil
Fuse the DecoFoil in place according to the instructions on the package.

Allow the adhesive to cool COMPLETELY before peeling off the DecoFoil, removing early or not fusing completely will result in incomplete coverage.

Baste the batting, backing, and top together with the basting spray, or your preferred method of basting.

Using the chalk marking pencil, draw the additional un-foiled panels on R2D2, using the placement of the foil pieces as your guides.

With your walking foot, stitch around the additional side panels to define them. Tie off the threads, and bury them.

Trim the curve along the top with scissors.

Bind, using two-colored binding if you prefer. Make sure to use bias-cut binding along the curve.

My boys were absolutely thrilled with their mini R2D2 Quilt, and couldn’t wait to hang it in their room! It goes great with the BB8 Pouf that I made for them as well. You can whip up this R2D2 quilt in an afternoon – the Star Wars fan in your life will love you for it!

this R2D2 Quilt really shines - and is super easy to make!

BB8 Pouf

Is your family Star Wars Crazy? With a house full of boys, you can bet mine is! My 3 and 7 year old boys love Star Wars. And the adorable Droids in it. R2D2, Chopper, and BB8 are their favorite! So, when Fairfield offered to send me a foam Pouf to design with, I knew what I would make with it! It HAD to become a BB8 Pouf!!

DIY BB8 Pouf

Adorable, right? And really simple to make – I whipped this out in an evening – from sewing the cover to painting it. When my kiddos woke up in the morning, this BB8 was waiting for them!

You’ll need:
Fairfield 6″ tall foam Pouf (leave the plastic packaging on)
Pencil
Fabric – I used 1.5 yards of Robert Kaufman Outback Canvas
24″ white zipper
DecoArt Multisurface paint in Dolphin and Orange Sherbet
Paintbrush
Sewing Machine and thread

If you read that supply list and the word “zipper” scared you, don’t be afraid! Zippers are not hard, and I’m going to show you a very basic way to insert the zipper that doesn’t take crazy sewing skills. Also, you’ll be glad you have the zipper because white fabric in a boys’ room is going to need to be washed fairly often!

Start by cutting your fabric. Trace the pouf onto a double layer of the fabric with a pencil.

Then cut two strips of fabric – one 4″ and one 6.5″, both the entire Width of the Fabric.

cut strips

Cut the 4″ strip in half. Lay one on top of the zipper, and with your zipper foot on, stitch all the way down the zipper. If the zipper pull gets in the way, stop with your needle down, move the zipper pull, then keep stitching.

stitch on zipper

Flip the fabric over to expose the zipper, then top-stitch down to secure.

top stitch zipper

Repeat with the other side, then trim the fabric to the length of the usable portion of the zipper, plus 1/4″ on each side for seam allowance.

Trim the width to 6.5″

trim up

Stitch the two strips together on the short ends, to make one long strip.

attach side to zipper

Pin the side to one of the circles, then stitch on using a 1/4″ seam allowance.

attach sides to bottom

Stop stitching about 2″ from the end. Match up the two ends, trim, and stitch closed.

stitch closed side

Lay the top circle on the bottom, and draw registration points to line up.

draw points for matching

Use these registration points as guides to pin the circle to the edge of the side. This will prevent puckers.

pin top to sides

OPEN THE ZIPPER. Don’t forget to do this!! You’ll want to open the zipper partway before you continue, so you can turn it right side out in the next step. Then, stitch all the way around the circle.

Turn the cover right-side-out, and insert the Pouf with the plastic packaging still on.

insert foam pouf

Using a dinner plate, draw circles onto your pouf lightly, with a pencil.

draw circles

Paint them in. I looked up images of BB8, then free-handed the design based on what I saw, but you can use a ruler and pencil to sketch in your designs before painting.

paint circles

Allow the paint to dry. After it is completely dry, you can pull out the pouf, remove the plastic, and re-insert it. You’ll see that the plastic protected the foam from any paint that seeped through the fabric.

colors of paint

Your kids (of any age) will be so excited!

stitched-pouf-cover-painted

finished-pouf