BB8 Pouf

Is your family Star Wars Crazy? With a house full of boys, you can bet mine is! My 3 and 7 year old boys love Star Wars. And the adorable Droids in it. R2D2, Chopper, and BB8 are their favorite! So, when Fairfield offered to send me a foam Pouf to design with, I knew what I would make with it! It HAD to become a BB8 Pouf!!

DIY BB8 Pouf

Adorable, right? And really simple to make – I whipped this out in an evening – from sewing the cover to painting it. When my kiddos woke up in the morning, this BB8 was waiting for them!

You’ll need:
Fairfield 6″ tall foam Pouf (leave the plastic packaging on)
Pencil
Fabric – I used 1.5 yards of Robert Kaufman Outback Canvas
24″ white zipper
DecoArt Multisurface paint in Dolphin and Orange Sherbet
Paintbrush
Sewing Machine and thread

If you read that supply list and the word “zipper” scared you, don’t be afraid! Zippers are not hard, and I’m going to show you a very basic way to insert the zipper that doesn’t take crazy sewing skills. Also, you’ll be glad you have the zipper because white fabric in a boys’ room is going to need to be washed fairly often!

Start by cutting your fabric. Trace the pouf onto a double layer of the fabric with a pencil.

Then cut two strips of fabric – one 4″ and one 6.5″, both the entire Width of the Fabric.

cut strips

Cut the 4″ strip in half. Lay one on top of the zipper, and with your zipper foot on, stitch all the way down the zipper. If the zipper pull gets in the way, stop with your needle down, move the zipper pull, then keep stitching.

stitch on zipper

Flip the fabric over to expose the zipper, then top-stitch down to secure.

top stitch zipper

Repeat with the other side, then trim the fabric to the length of the usable portion of the zipper, plus 1/4″ on each side for seam allowance.

Trim the width to 6.5″

trim up

Stitch the two strips together on the short ends, to make one long strip.

attach side to zipper

Pin the side to one of the circles, then stitch on using a 1/4″ seam allowance.

attach sides to bottom

Stop stitching about 2″ from the end. Match up the two ends, trim, and stitch closed.

stitch closed side

Lay the top circle on the bottom, and draw registration points to line up.

draw points for matching

Use these registration points as guides to pin the circle to the edge of the side. This will prevent puckers.

pin top to sides

OPEN THE ZIPPER. Don’t forget to do this!! You’ll want to open the zipper partway before you continue, so you can turn it right side out in the next step. Then, stitch all the way around the circle.

Turn the cover right-side-out, and insert the Pouf with the plastic packaging still on.

insert foam pouf

Using a dinner plate, draw circles onto your pouf lightly, with a pencil.

draw circles

Paint them in. I looked up images of BB8, then free-handed the design based on what I saw, but you can use a ruler and pencil to sketch in your designs before painting.

paint circles

Allow the paint to dry. After it is completely dry, you can pull out the pouf, remove the plastic, and re-insert it. You’ll see that the plastic protected the foam from any paint that seeped through the fabric.

colors of paint

Your kids (of any age) will be so excited!

stitched-pouf-cover-painted

finished-pouf

No-Melt Snowballs

Want a snowball fight? These no-melt snowballs are perfect for an indoor snowball fight, any time of year!

no melt snowballs

To make these snowballs, you’ll need:

supplies for snowballs

Polyfil Batting
Scissors
Yarn
Rice
Aluminum Foil

Cut squares of Aluminum foil about 6″x6″.

put on rice

Put 1-2 tbsp in the center of each piece. Crinkle into a ball.

Place the ball onto a strip of batting.

strip of batting

Roll up the foil in the strip of batting.

wrap with batting

Wrap with yarn to secure.

wrap with yarn

Tie off the end, trim and tuck the ends.

tie off ends

Then, snowball fight!

throwing-snowballs-3

throwing-snowballs-2

throwing-snowballs-1

100th Day of School Lego Shirt

So, apparently, the 100th day of school is now a “thing”. Which I think is fun. Any time I can get my son to celebrate going to school is a win in my book! Our school invited students to wear a shirt with 100 things on it to celebrate the 100th day. Most kids would pick something simple – stickers, buttons, pom-poms… but my son wanted Legos. A 100th day of school Lego shirt. Okay.

My first thought was to paint 100 Legos onto a shirt. But I knew that would be tedious. I then thought about hot gluing the Legos onto the shirt… but I wasn’t sure how well it would hold up with my very active 6 year old… I knew it needed to be more secure. That’s when I came up with the idea of using Thermoweb’s HeatNBond Iron-on vinyl. The vinyl is most often used on top of placemats or coasters so that you can just wipe them off… but in this case, it is PERFECT for making a clear “window” to secure the Legos in place! And, because of the heat-activated adhesive, the Legos all stay in place in the zeros, instead of falling to the bottom in a heap, like they would with regular vinyl.

100th day of school lego shirt

You could absolutely use this technique for something other than Legos – buttons, bows, beads – anything small that is fairly heat-tolerant (it needs to at least be able to go through the dryer without melting).

Of course, I made this shirt the night before, and wasn’t sure if it would work, so I didn’t take step-by-step photos. But I’ll walk you through how to make the shirt yourself:

You’ll need (affiliate links added for your benefit and mine):
Plain shirt
Thermoweb 17-Inch by 2-Yard Heat’n Bond Iron-On Vinyl, Gloss
Iron, ironing board
Washcloth
Fabric Paint
Paintbrush
100 small Legos (or other object)
Scissors

1. Decide how big the ovals for your zeros are going to be. You can draw them on the backing paper for the Heat n Bond. Cut them out.

2. Divide the Legos into two piles, each with 50 pieces.

3. Place one pile of Legos on the shirt, and spread out. Flip them over, rotate them, do whatever you want to get them into position. Peel the backing paper off the vinyl oval, and place on top of the Legos. Make sure you have a border on ALL sides of at least 1/2″. You are placing the HeatnBond so that the side that used to have the paper on it is facing DOWN.

MY SUGGESTION: According to the directions on the HeatnBond, you cover your oval with the paper, and then press. If your oval is at all wonky, this leaves vinyl exposed. Instead of risking my shirt, I cut a large piece from the roll of vinyl, removed the vinyl and used the large piece of paper. I felt this protected the whole area better. I threw the extra piece of vinyl in the garbage. Call me wasteful, but wasting the entire shirt when I ruin it by burning a hole in the vinyl is worse in my book.

4. So… cover the oval with the backing paper, and then a washcloth, and press. Move the iron frequently, leaving it in each spot for just a second. I don’t know how much heat a Lego can take – I didn’t want to find out.

5. Once you’ve set everything in place, remove ONLY THE WASHCLOTH. Using the edge of the iron, seal all the edges of the vinyl by securing them to the shirt. This is what that 1/2″ border is for.

6. Repeat these steps with the second oval.

7. At this point, I stitched the edges of the ovals in place. I think this was overkill, and not needed. You can stitch yours if you’re worried about it… but for a shirt that only needs to last a day, it might not be worth getting the sewing machine out. Vinyl is a pain to stitch on – it sticks to the bottom of a standard sewing machine foot. You can use your walking foot, but it might be too wide (mine was). You can put masking tape on the bottom of your zipper foot, or you can use a free-motion foot (which is what I did).

8. Last step! Put a piece of paper inside the shirt to keep the layers from sticking together from the paint, then paint in the 1 and around the ovals to make the zeros. I used puffy paint and a small paintbrush. Let dry overnight. Your shirt is DONE!

100 day of school lego shirt

I did tell my son not to play with the shirt at school – I don’t know how easy it would be for him to tear a hole through the vinyl with a pointy-edged Lego. And I told him that if the shirt breaks or gets destroyed at school, not to worry. It is really just for today, and he doesn’t need to get upset if it gets messed up.

Legos added to a 100th day shirt

He was super excited to put it on. He is pretty confident that it will be the best 100th day shirt in the class. I think any 100th day shirt with Legos is pretty ambitious, and I’m really excited with how this one turned out. AND – it was super easy! I might have to use a technique like this on a quilt in the future – it was so fun and easy!

100th day of school shirt with legos

Simple Money for Kids

This holiday, I thought my oldest son, now 6, needed more help understanding that Christmas is about giving. With so many aunts, uncles, great-aunts, great-uncles, and grandparents, there sure is a lot of getting going on! Getting is easy to enjoy… but so is giving. Giving time, giving thought, and giving donations are all ways that we can help support our communities. I love this article from Yahoo sharing  6 simple ways to give back. A great place to get started when thinking about others.

I came up with a plan for him to help earn some Christmas money that would be spent on holiday gifts. He enjoyed helping, and he loved shopping. It was hard for him to pick gifts for others when there were so many cool things HE wanted. And it was hard for him to spend money he had worked for on others. But he did enjoy finding the right thing for each person, and getting some special shopping time with me.

As he gets older, I want to keep this lesson of giving, as well as an overall responsibility with money. These are great lessons to learn young.

To help teach these concepts all year long, I grabbed three mason jars, some construction paper, scissors, and pens. I made three mason jars – one for money to save, one for money to spend, and one for money to give. I know some people use a similar system, and have certain percentages of their money that should go into each. I don’t want this system to be that rigid. I’d rather my son decide where he’d like his money to go. And because the jars are glass, he can see how much money is in each.

Simple Money for kids

I traced the lids onto the construction paper.

trace lids

Cut them out, then cut a slit in each. Make sure the hole is big enough that a folded dollar can fit in.

cut hole

Each lid gets a word – spend, save, give. You can choose different words if you like.

write on papers

Remove the metal plate portion of each lid, replace with the paper, and screw the lid back in place.

put on lid

Repeat for all the lids, your jars are done!

finished savings jars

If you’re looking for more ideas for giving, check out the Yahoo article on  6 simple ways to give back.

Dr. Seuss “Oh The Places You’ll Go” Wallhanging

Quilt based on Oh the Places Youll Go by Dr Seuss

Last year I made a quilted wallhanging using a simplified version of one of the last images in my favorite Dr. Seuss Book – “Oh, the Places You’ll Go.” I think the Dr Seuss Quilt is one of my favorite things I’ve made, and now it has a companion in a second Dr Seuss Quilt. I love the quote from the book. I love the whimsy of the image, and I love that it is the first thing I ever free-motion quilted. I decided to make a companion piece this year, using the same techniques, but a different image from the same book. My hope is to make another one next year so that I can have the three hanging side-by-side in the playroom. Here are the two I have so far.

Seuss Wallhangings in Playroom

I used basically the same technique I did last year. I started by drawing out the image, and picking fabrics. I labeled my drawing so that I would know what color each part would be.

draw out and pick colors

Then I created Printable versions of each part, fused them onto the right color fabric, and fused those onto the background. I used the dark orange as a background color, cut it to 18″ square before fusing on all the pieces.

Fuse pieces in place

Then I started stitching. Using the image from the book as a reference, I spent about  4 hours quilting, which adds all the beautiful detail. I love that it doesn’t have to be perfect. In fact, the less perfect, the better! Here it is quilted, but not bound.

quilted and not bound

I did make one change from last year. I painted in the lettering. Last year I took the time to cut out each individual letter, then press it, and stitch it in place. Since I was doing four lines of text this year, and they were going to be smaller, I decided that painting them in was the best choice. It was tedious, but so much better than cutting and stitching!

After quilting, I trimmed everything down, and bound the quilt, adding pockets in the corner so I could easily add a rod for hanging.

If you’re interested in making your own, here is what you’ll need:
OH THE PLACES YOU’LL GO QUILT
(finished size 21″x26″)

Fat Quarter Dark Orange fabric, cut to 18″ square.
1/2 yard green fabric (for borders – cut two pieces each 2″x18″ and two pieces 4.5″x21″)
1 1/2 yards black fabric (binding, backing)
Black thread
Small pieces (I used Fat Quarters) of the following colors: Orange, Light Orange, Light Yellow, Medium Yellow, Green, Light Gray (for the child’s hands and face)
Applique pattern pieces printed onto Jenny Haskins Web Magic (printable fusable for applique) – found at quilt shops that cater to machine embroidery
Basting Spray
Batting
Mechanical Pencil

Here are the pattern pieces:
Green 1 Fusible
Green 2 Fusible
Medium Yellow Fusible
Orange 1 Fusible
Orange 2 Fusible
Seuss Light Yellow Fusible

Even in my messy playroom, I love the way these look on my wall!

messy playroom

Please note: These instructions are for personal use only. The pattern and quilt are not for sale. The pattern is intended for personal use only. If you’re interested in purchasing Dr Seuss fabric, Robert Kaufman has awesome Seuss Fabrics.

Holiday Crafty Goodness at Consumer Crafts!

This post is sponsored by the lovely folks at Consumer Crafts, who fuel my crafting addiction on a regular basis. Refer a friend and see what I’m talking about.

So often I get asked WHERE I get all my craft supplies. I live fairly close to a craft store, and so some of it comes from there… but honestly, they’re not open at 2am when my crafty brain is really going. So I hop online to Consumer Crafts, and start clicking away… their site is super easy to use, and I always end up with a basket full of craft supplies that I can’t wait to use! They ship them in a big box right to my door. It is like the pizza delivery of craft supplies! Everything from big machines to basics like glue and markers, they’ve got it all…

And right now they have an awesome Refer a Friend Campaign going!

Consumer Crafts Refer a Friend

Did I mention that their prices are insanely good? Yup. I’m not saying that I’ve stood in my craft store considering the purchase of a big machine… and hopped onto the Consumer Crafts site with my handy smart phone, then seen that the item was cheaper at Consumer Crafts. But I totally could. Because that happened. So, if you’re one of the 6 lucky winners… let me tell you that that $250 will get you quite a bit!

I’ve run to Consumer Crafts for Christmas crafts, birthday party craft supplies, baby shower craft supplies, general crafting supplies… just head on over and check it out… after signing up for the Refer a Friend campaign!

I recently used their supplies to make this wreath (tutorial to come)…

all holly leaves in place

And a bunch of these snow ornaments… and even though I bought two packs of these glass ornaments… not a single one broke in shipping!

Snow Writing Ornament

Enough with my Consumer Crafts Love fest… go Refer a friend and see what I’m talking about.

Oh… and if you need some inspiration, check out all these great places you can connect with Consumer Crafts:
Facebook: http://www.facebook.com/ConsumerCrafts
Twitter: https://twitter.com/Consumer_Crafts
Pinterest: http://pinterest.com/consumercrafts/
Instagram: http://instagram.com/consumercrafts
Blog: http://www.craftsunleashed.com/

Tips for Donating School Supplies (scissors, craft supplies, and more!)

I am a member of the Collective Bias®  Social Fabric® Community.  This shop has been compensated as part of a social shopper insights study for Collective Bias and their client.

My son started Kindergarten almost a month ago. It doesn’t seem possible. I’m now trying to juggle Mommy & Me events for my little one, and PTA meetings for my oldest’s new school. The school is fairly new – it has been around for 4 years – but much of the staff this year is new. Brand new. My son has a freshly-minted Kindergarten teacher. This man (yes, he’s got a male teacher), not only has to navigate a morning and afternoon class of 25 Kindergarteners each, but also 50 sets of parents!

Not only does he not come with years of experience, but he also doesn’t come with a classroom loaded with supplies collected across decades. It was important to me to let him know that I’m a parent who wants to support my child, and my child’s school. That’s why I was super excited to be selected to participate in this Fiskar’s Champions for Kids Campaign. Fiskars sent me money to buy school supplies that I could donate to my son’s new classroom!

tips for donating school supplies

From this experience, I want to share with you some tips for donating school supplies.

1. Ask – Ask the teacher what they need. For a new teacher like ours, the answer might be “everything!” Ask specific questions. Maybe the teacher has a project coming up that could use certain supplies? One of the things we picked out was a class set of Fiskars safety scissors. There are 25 kids in a class, so we picked out 28 pairs (you always need a few extras) of scissors. This will last our rookie teacher for years! We also picked some Fiskars wooden rulers that were both inexpensive and will stand up to a room full of Kindergarteners, year after year.

classroom set of scissors

2. Variety – Some things we know every teacher needs – pencils, paper, erasers. Think beyond the everyday. We chose a set of colorful dry erase markers. Our classrooms are equipped with large dry erase boards, and there is nothing as wonderful as having a nice, fresh, dry erase marker to write with!

bin of school supplies

3. Storage – Especially for a new teacher, storage is important! Though a teacher will never turn away a grocery bag filled with school supplies, it helps to think ahead. Once those 28 sets of scissors are taken out of their packages, where will they be stored? Giving the school supplies in plastic bins means the supplies will have a place to go after they are opened. Using clear bins means that it is very easy for the teacher to see what is inside, and find what he needs.

 

4. Duplicates – At the beginning of the school year, each student was sent home a list of basic supplies. Things like glue and crayons that they will need this year. If a student wasn’t able to bring these in, or if they run out, having duplicates on hand will help the teacher focus on the more important things – like the lesson he is teaching. I made sure to include extras of things like markers and crayons.

two bins of school supplies

5. Specialty Items – Do you remember being in school, and there was something special you couldn’t wait to play with? So you’d finish your work as fast as possible so that you could go play with that toy? Think of fun extras you can donate. I chose a giant set of 50 Crayola Pipsqueak markers that telescopes into a tower. The teacher can set these on a table for kids to color with after finishing their work, as a fun reward.

6. Get others involved – Do your part, but then encourage others to join in as well. Set an example for the community, and your family. I made sure my son was involved, so that he could see the impact these supplies have on his classroom.

get kids involved

7. Have fun! – Donating school supplies is giving a gift that will continue to have an impact in the lives of children, potentially for years. That makes it fun. But, I chose to have a little more fun, and I picked up a few things for myself to make a little fun something for my son to bring to school. I’ll share that with you here below.

 

When L goes to school, he misses us. It is only for 3 hours a day, but he’s still adjusting to the new building, the new kids, and the new routine. And it is hard. When I saw this little “lucky” book on the Fiskars website, I was inspired to make something similar to attach to my son’s backpack, so that he could bring a little reminder of his family to school each day.

supplies for photo tagsSupplies:

Tags
Photos
Fiskars Trimmer
Fiskars Scissors
Elmer’s Glue Stick
Elmer’s School Glue
Elmer’s Glitter Glue
Elmer’s Boarders
Metal Ring
Assorted Ribbons
Paintbrush

 

Start by trimming your photos smaller than your tags. The original album uses chipboard, but I wanted something smaller and lighter to hang on my son’s bag, so I went with the tags. Put a border on each tag, trim off the excess with scissors, and then glue the photo in place with the glue stick.

prepare tags

Put school glue on top of the photo, and brush an even coat with the paintbrush. This protects the photo, and seals everything in place.

coat in Elmer's School Glue

I did the same thing with glitter glue.

coat with glitter glue

Put everything aside to dry.

sealed with glue

Tie the ribbons onto the metal ring. To help keep the knots secure, add a couple drops of school glue to the knots.

glue knots in place

Then just hang it on your child’s bag, so they can take a little love with them to school each day!

backpack love tags

For more information, check out Champions for Kids and  Champions for Kids on Facebook.

#cfk  #Fiskars4Kids #shop

New Simplicity Kids Backpack Pattern by The Sewing Loft

Tree backpack by The Sewing Loft and Simplicity

When my friend Heather from The Sewing Loft told me that Simplicity was printing her pattern and that it would be for sale at major retailers, I might’ve done a little happy dance! If you haven’t checked out Heather’s site, and seen her great designs, you really must. She does so many fun projects that I really wish we didn’t live on opposite sides of the country, because I want to do a sew-in weekend with Heather!

Later, Heather told me that she’d be able to share one of these cute patterns with me, and when it arrived in the mail… well… there was a second happy dance! Such a cute pattern, with so many fun variations, and inside I found all the great step-by-step instructions that Simplicity is known for.

New pattern by the Sewing Loft

Here on the blog, I primarily do quilting-type projects when I sew, but my sewing background includes more than just quilting. I have done a fair amount of garment sewing, and the feel of a tissue paper pattern always brings back memories of making my prom dress. My mom and I made more than one of my dresses for Jr. High and High School dances, and I’ve made plenty of other garments, but for some reason, the crinkle of a tissue pattern makes me think of senior year.

I decided to make the cute tree design (bottom left on the pattern cover). I pulled out tree fabrics and got to work. This is a great pattern for a new sewist. I’ve taught beginning sewing classes and, with some supervision, a child as young as 12 should be able to tackle this pattern. It isn’t difficult, but has a great variety of basic techniques, like threading in the cords, creating the casing, applique, and cutting and marking a pattern.

applique on tree

I had fun with the applique on this project… especially after I replaced my needle. I find that when my sewing machine is giving me a hard time, replacing the needle goes a long way towards making us both happy.

Here is the finished backpack – I know my boys will love using it!

finished backpack

Once I finished, I carefully folded back up all the pattern pieces and tucked them back into the pattern envelope – there are many other backpack patterns and instructions in this pattern, and I’m looking forward to trying the others… I have some nieces that might like a set of cupcake packs!

tuck pattern pieces back in

This pattern is on sale now at JoAnns Fabric and Crafts Stores, Hobby Lobby, Hancock Fabrics, and Walmart. You can find it as Simplicity #1602. I’m sure you’ll have as much fun making it as I did!

Boys Can Play Dress Up with Costume Express

When Collective Bias gave me the opportunity to check out Costume Express, I was super excited. Sure, this is a sponsored post, but that doesn’t mean that I don’t love everything about these costumes!

boys love to play dress up

My son loves to play dress up. I discovered this during the course of the summer. His summer preschool has themed weeks. Every Friday, the children dress up to go with the theme. For Wizard Week I made him a Wizard Costume, and he LOVED it. When he wore his robe and hat, and picked up his wand, he felt like he really could be a wizard. I loved that I was able to provide him with a few simple props to help him stretch his imagination.

This got me to thinking about what other costumes I could provide for him – and this is where Costume Express comes in. They have an amazing variety of costumes for all occasions – themed parties, Halloween, or dress-up clothes!

Nowadays, it is so easy for kids to spend time in front of a screen. My son knows how to operate my tablet, and plays a mean game of Bad Piggies. He has several favorite movies that we rotate through, and he’s recently learned to operate the Roku remote on his own. All this means that he is spending way too much time plugged in. Living in Vegas with 110 degree heat all summer, I can’t just send him outside in the middle of the day. Having fun, indoor activities that stretch his imagination without putting him in front of a screen is key. That’s why I wanted a well-stocked dress-up box.

I ordered everything online, it was super simple to find what I wanted. You can see my whole Costume Express shopping experience here.

Opening the Costumes Express Box

When the box came in, Little Moore was excited to see what was inside. I hadn’t told him that I’d bought costumes – just that I had a surprise for him.

He dug through all the costumes – so many choices! He decided to be a fireman, and that his little brother could be a police officer.

Pulling out Costumes

I love that these simple costumes are easy for the kids to take on and off themselves, and that my 14-month old can wear one to play with his brother. He’s not entirely sure what is going on, but he knows he is in on the fun. Plus, both of them are running around having a good time and NOT watching TV or playing video games.

I also love the option to add hats to my order. Costumes are great, but I think a hat does a great job finishing the look, and making the experience feel a little more genuine for my little guy.

Fireman Costume

It was tough getting him to stand still for this photo… all he wanted to do was run around and be a fireman!

He loved these costumes so much, I’m sure that I will be taking many trips to the grocery store with my little fireman, police officer, doctor, or road crew! Instead of handing him my phone to keep him entertained in the store, we’ll have a conversation about his new profession. Groceries might be “on fire” and need to be put out. We can be on the lookout for bad guys. I might come down with mysterious symptoms he needs to diagnose. Or everything might need fixing in a dangerous construction zone (watch out for pot holes!) And they’re sturdy enough that his little brother will get hours of fun out of them as well. I can’t wait to have a playdate so that we can put the kids in costume and crank YMCA… maybe I need to get an Indian costume first?

Road Crew Costume and Doctor Costume

I had a great experience shopping at Costume Express – it was easy to find what I wanted, they had great options, the prices were reasonable, and the package arrive a day earlier than promised! With Halloween coming up I can’t think of a better resource for costumes, and get your kids to #Unplug2Play!

For more details, you can catch Costume Express on your favorite Social Media Channels:

Follow Costume Express on Twitter
Like Costume Express on Facebook
Circle Costume Express on Google+

Monsters University Game in a BluRay Case

Make a Monsters U game inside a BluRay Case

I bought the pre-sale of Monsters University on BluRay, and made some cute Monsters U Countdown blocks to go with it. I’ll be mailed the movie when it comes out… which leaves me with a BluRay case that has no movie in it. (PS – I also made Monsters U Juice Box Printables and a Mike Wazowski t-shirt if you’re into Monsters U crafts)

Monsters U Movie presale copy

I thought I’d turn the movie case into a little portable game in a BluRay Case. This is super simple to do, I’ve got all the printables ready to go… here is what you need.

Print the new BluRay Game Cover on standard paper
Print the BluRay Game Pieces on cardstock
Sharp scissors with a pointy end (or scissors and a craft or hobby knife)
Double-sided tape
Paper fastener (aka a Brad)

After you print out the Monsters University Game pieces, cut them out.

Open up the BluRay case and pull out the old cover, slip the new BlurRay Game Cover into place.

Monsters U Game made from BluRay Case

Leave the case open so that you can see the inside. You’ll want to use sharp scissors or a craft knife to cut away the raised lip on the left side. It is about 3/4″ down from the top. Just trim it down as close to the base as possible. Now you can slip the game board in on the left side.

On the right side, use the point of your scissors or the sharp point of a craft knife to carefully make a circle in the very center of the circle that holds the BluRay movie. You’ll want your hole to be about 1/4″ in diameter. Carefully cut away any plastic that gets pulled up when you make the hole. Be careful not to damage the cover or plastic on the other side.

Cut a hole in the center of the large numbered circle so that it slips over the raised center, and use double sided tape to stick it in place where the DVD would go. Use the tip of your scissors or the brad itself to make a hole in the center of the spinning arrow. Insert the brad into the arrow, an then into the hole you made in the raised center circle. Fasten the brad on the back LOOSELY. You want to make sure it still spins easily.

Fold your game pieces, and use a small piece of double sided tape to stick the bottom flaps together.

You’re ready to play your game in a BluRay Case!

Monsters U Game inside a BluRay Case